AVSS1.5mm², AVSS4.0mm², 0.34mm² double shielded cable excavator engine harness

1. Product description

AVSS1.5mm², AVSS4.0mm², 0.34mm² double shielded cable excavator engine harness has a double shielding structure, including braided

shielding and aluminum foil shielding. Braided shielding is composed of fine fabric or braided thread, which provides good electromagnetic

shielding effect. The aluminum foil shield is covered outside the braided shield to further enhance the shielding performance. The double shielded

cable can effectively reduce the influence of external electromagnetic interference on internal signals, and is suitable for environments where

signal integrity needs to be protected, such as excavator engine wiring harness.Due to the larger conductor cross-sectional area, the AVSS4.0mm²

cable can withstand higher current load and is suitable for transmitting larger power power signals.

Feel free to contact with us, if you ever needed to consider your wire harness solution.

2. Product information

3. Picture of real products

4. Application area

I: Sensor connection: The cables in the wiring harness of an excavator engine are usually used to connect various sensors to monitor the temperature, pressure, speed and other parameters of the engine. These sensors provide data for controlling and monitoring engine performance and operating conditions.

II: Control systems: These industrial cables are also used to connect the control systems of excavator engines, including engine control units (ECUs) and other control modules. Through these cables, the control system can receive and send instructions to achieve accurate control and regulation of the engine.

III: Power transmission: These industrial cables can be used to transmit power signals in engine systems. They can carry high power currents, which are used to supply electrical energy required by the engine, such as starting circuit, motor drive, etc.

5. Feature

I: Electromagnetic shielding: The braided shielding and aluminum foil shielding structure of the industrial cable harness can effectively resist the influence of external electromagnetic interference on internal signals. In the environment of excavator engine, there are various electromagnetic interference sources, such as motor, frequency converter, discharge system, etc. The shielding structure of the cable can block the entry of these interference signals, protect the transmitted power and signals from external interference, and ensure the accuracy and reliability of the signals.

II: Anti-jamming performance: The double shielding structure provides an additional layer of protection to make the cable more anti-jamming performance. Braided shielding effectively absorbs and disperses external electromagnetic interference through the structure of fine fabric or braided thread. Aluminum foil shielding forms a shielding shell by covering the insulation layer to further reduce the influence of external interference signals. These shields work together to protect power and signals from electromagnetic interference in the excavator engine environment.

6. Main products

I: Wiring harness of industrial control equipment:

Power wiring harness, signal wiring harness, control wiring harness, data wiring harness, video wiring harness, motor wiring harness, debugging wiring harness, cabinet wiring harness.

II: Medical equipment wire harnesses:

Endoscope wire harness, infusion pump power cord, ECG lead wire, monitor cable, electric operating table wire harness, electric knife wire harness and mechanical arm wire harness.

III: New energy wire harnesses:

Charging harness, energy storage harness, electric vehicle harness, navigation harness, automotive harness, instrument panel harness, sensor harness, compressor harness.

IV: Other equipment wire harnesses:

Communication equipment wiring harness, outdoor waterproof wiring harness communication equipment wiring harness, power cord/distribution box wiring harness, etc. Welcome to draw custom wiring harness.

Jiangsu Shineplus Precision Technology Co., Ltd. was established in 2021, located in Baipu, Rugao City, Nantong Town, 3000M² production

area. Specializing in the design and manufacture of cable components, designed to provide customers with a comprehensive wiring system.

The main product directions are: green energy, industrial automation equipment, medical physiotherapy Equipment and medical imaging

equipment, rail transit, communication facilities equipment wiring system and other fields.

In addition, Guangdong Xinfusheng Connection Technology Co., LTD., established in 2020, is located in Guangdong Hong Kong Industrial Park, Humen Town, Dongguan City, with a production area of 4500M² and 150 employees. Specializing in the design and manufacture of cable components, aiming to provide customers with comprehensive wiring system solutions, the main product directions are: mainly in the field of medical and health products, but also involving green energy, industrial automation, high precision equipment, communication connection and other fields.

Our main products

Our Customer

Company honors and patents